New Slope Rail
R-06
A slope that climbs 1 Block Pier tier in a single rail. The entrance to overpasses.
The incline is not straight: it curves gently so that both ends sit level. That is why ordinary rails joined before and after the slope don't kink at the joint.
Whatever you climb, you must come back down by the same amount or the loop won't close. Using the same number of rails going up as coming down is the first knack of building in three dimensions.
Dimensions
- Part number
- R-06
- Category
- Slopes & elevated
- Ends
- ① slot · ② tab
- Shape
- straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm → straight 27mm
- Rail length
- 432mm
- Footprint
- 470mm × 38mm
- Rise per rail
- 66mm
- Flipping
- Can be flipped
Tips for building
- One of these climbs one Block Pier tier (66mm).
Build with these exact dimensions
You can lay out every part, New Slope Rail included, using real-world dimensions. It accounts for the free play in every joint, so you know whether the loop closes before you build.